OIL SEPARATORS AUTOMOTIVE

The oil separators SOC-S have been designed for the automotive field. They must be installed in a vertical position. In the condenser is installed in a higher position compared to the oil separator, then it is advisable to insert a check valve to avoid the coolant returning into the separator. The body of the separator must be kept cold during the soldering of the connections. The diameter of the separator must not be smaller than the diameter of the delivery compressor. In order to avoid excessive disturbance and noise, we advise avoiding excessive speed or the use of gas coolants throught the separator, the advised speed is 0,4-0,6 m/s In order to control the correct working of the separator, we advise to install an indicator type SPL on the return line of the oil to the compressor.

Materials
Stainless steel body.
The flare connections are in copper steel

Operating conditions
Temperature -20° + 100°
Working pressure 42 bar